Cylinder Head Assembly: Specifications

Cylinder Head Bolts





Install new bolts
First pass 20 Nm
Second pass 60 Nm
Final pass Tighten 130°

Cylinder Head
Max. distortion 0,5 mm
Max. distortion, transverse 0,2 mm
Height 149,4 ± 0,15 mm

Camshaft Bearing Housing / Valve Cover Screws 14 Nm
Tighten screws from middle and outwards

Intake Manifold Fasteners Specifications

Exhaust Manifold / Turbocharger M8 Nuts Specifications

Camshaft Gear/Sprocket Bolts Specifications