Balance Shaft Bearing: Service and Repair

Balance Shaft Bearing

Note! Some variation in the illustrations may occur, but the essential information is always correct.






Removal

Remove cylinder head, left. Refer to: Cylinder head/gasket, cylinder 1, 3, 5 and 7 (Bank 1), replacing, B8444S Cylinder Head/Gasket, Cylinder 1, 3, 5 And 7 (Bank 1), Replacing






















999 7246 Press tool 999 7246 Press Tool 999 7245 Screw 999 7245 Screw















Vehicles with engine serial number up to 6833






Vehicles with engine serial number up to 6833






All vehicles

Installation






Caution! Make sure that the area around the component is clean and free of foreign material.










999 7248 Position setter 999 7248 Position Setter 999 7025 Drift Haldex coupling 999 7025 Drift Haldex Coupling


















999 7247 Drift 999 7247 Drift





999 7246 Press tool 999 7246 Press Tool 999 7247 Drift 999 7247 Drift 999 7248 Position setter 999 7248 Position Setter





Torque: M10, 50 Nm





Torque: M8, 24 Nm.





Torque: M6, 10 Nm

Install cylinder head, left. Refer to: Cylinder head/gasket, cylinder 1, 3, 5 and 7 (Bank 1), replacing, B8444S Cylinder Head/Gasket, Cylinder 1, 3, 5 And 7 (Bank 1), Replacing