Torque Rod, Lower, Replacing

Torque rod, lower, replacement

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work






Remove:
- the bolts, x6
- the protective cover under the engine.

Removal

Removing the torque rod, lower





Remove:
- the nuts, x2
- the gearbox bolts, x2
- the torque rod.

Installation

Note! For tightening torques, see: Tightening torque, B8444S Tightening Torque.

Installing the torque rod, lower

Install:
- the torque rod
- the nuts, x2. Tighten in accordance with: Tightening torque, B8444S Tightening Torque
- the gearbox bolts, x2. Tighten in accordance with: Tightening torque, B8444S Tightening Torque.

Finishing


Install:
- the protective cover under the engine
- the bolts, x6.