Garage Door Opener Transmitter: Service and Repair

Home Link























INTRODUCTION
- NOTE! Read through the whole installation instruction before starting the work.
- The front page gives the date of this edition and the edition it replaces
- The second page shows the tools needed for the installation and the contents of the installation kit
- The illustrations display the procedure in order of operation. The order of operation is repeated in the text section
- Cut out the text page in order to follow the illustrations and text at the same time.






Home Link





- Fold the sun visor down.





- Unhook the sun visor from its mounting.





- Remove the cover.





- Remove the screws.





- Press the catches in and pull the sun visor down.





- Unplug the connector.
- Take the new sun visor from the kit and install in reverse order.

Note! Take care not to trap the cable during installation.

Tightening torque M6 screws: 10 Nm (7.3 lbf.ft).