Computers/Controls - Various Software Related Issues

Status: Released

Status Date: 2010-04-08

Issue Date: 2010-03-31

Refence: VIDA

Title: "Shift to P" message in Driver Information Module (DIM)

Ref No: US22804.1.1 en-GB

Issuer -

Partner: 3 US 7510 Volvo Cars North America

Func Group 4900

Func Desc: miscellaneous

Attachment





Vehicle Type





CSC





DTC

Text

For Your Information CSC Customer Symptom Code

Note! If using a printed copy of this Retailer Technical Journal, first check for the latest online version.

DESCRIPTION:

After a software download (SWDL) or a programming session the Transmission Control Module (TCM) may send out an incorrect value for the gear lever position. This will cause some functional disturbances.

^ The engine can not be shut off** with one push to the start/stop switch and there will be a "Shift to P" message in the DIM.

^ Park Assist Camera (PAC) will not show the reverse camera image. This will also cause a PAC Diagnostic Trouble Code (DTC) U040268-Invalid Data Received from Transmission Control Module

^ Central Electronic Module (CEM) will not activate the reverse camera.

**Note that the engine and ignition can still be shut off by holding the start/stop switch for 2-3 seconds.

PRODUCT MODIFICATION:

Beginning with the production of Model Year (MY) 2011 vehicles the TCM will have a new diagnostics that takes care of this problem.

SERVICE:

Do NOT replace any parts for this symptom!

After any SWDL/Programming session take the keys out of the car and let it go to sleep (this takes roughly 2-3 minutes). At the next start up everything should work as normal.