Front Steering Knuckle: Service and Repair

Wheel knuckle front

Removal

Note! Removal steps in this procedure may contain installation details.

Remove the front brake disc Refer to: Front brake disc, B6304T4, TF-80SC AWD, B6324S5, TF-80SC AWD, B6324S5, TF-80SC, B6324S4, TF-80SC, B6324S4, TF-80SC AWD Service and Repair

Torque: M6, 10 Nm

Torque: M5, 5 Nm

Torque: Driveshaft to wheel hub (front) Stage 1: 35 Nm Stage 2: 90 degree

Caution! Make sure that the ball joint ball does not rotate.

951 2945 Puller 951 2945 Puller
Torque: Tie rod end to wheel knuckle, 80 Nm

Torque: Ball joint to wheel knuckle, 110 Nm

999 7076 Lever 999 7076 Lever

Torque: Wheel knuckle to strut and spring assembly, 110 Nm

999 7088 Expander 999 7088 Expander

Installation

To install, reverse the removal procedure.