Catalytic Converter: Service and Repair

Catalytic converter

Operation number: 25418-2

Removal

Note! Removal steps in this procedure may contain installation details.

Remove the following items:
- Oxygen sensor (Catalyst monitor sensor) Refer to: Oxygen sensor (Catalyst monitor sensor), B6304T4 Service and Repair
- bevel gear Refer to: Bevel gear, B6304T4, TF-80SC AWD, B6324S5, TF-80SC AWD, B6324S4, TF-80SC AWD Bevel Gear




Torque: M8, 24 Nm





Install the following items:
1.
2. Torque: M8, 24 Nm




Torque: M8, 24 Nm

Installation

Perform flange joint, assembly Refer to: Flanged joint, assembling Service and Repair

To install, reverse the removal procedure.