Brake Pad: Testing and Inspection

Brake pads, front, check

Note! Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Remove the wheel.
Always start by removing the left-hand wheel at the first service. At the following service remove the right-hand wheel.
Check the brake pads every other time on the left, respectively right-hand side.
For specifications of wear, see Brake pads, front Front Wheel Brake.

Note! Always add 2 mm to the given measurements so that the minimum/replacement limits are not exceeded up to the next service interval.

Finishing

Install the wheel. See: Wheels Service and Repair.