Checking Infotainment Control Module (ICM)

Checking the infotainment control module (ICM)

Fault-tracing information

Checking the infotainment control module (ICM)
There are reported problems with the Infotainment control module (ICM)turning itself off at start. This is due to a malfunction in the software and is solved by downloading an updated software.

Hint: A temporary solution is to turn off the ignition for approx. 5 seconds and then turn on the ignition again.

Action
- Go to the tab software and program the control module with the latest software.

Fault symptom
- Audio other/Audio unit (complete) does not work
- Audio other/Other audio problems
- Radio/Does not work





Select continue when the defect has been remedied.

Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information

Attempt New Test - Fault-tracing information

-------------------------------------------------