FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Checking Accessory USB Unit (AUU)






Checking Accessory USB unit (AUU)

Information
The fault may be caused by:
- Malfunction in external sound source.
- Faulty software.
- Loose connections in leads.
- Internal fault in the Accessory USB unit (AUU).

Remedy in the following order.
Check function of the external sound source.
Load the Accessory USB Unit (AUU) with new software.

Continue - Verification

-------------------------------------------------

Verification

Corrective actions
- Ignition switch position II.
- Check that the external sound source is connected correctly to the control module.
- Check function of the Accessory USB Unit (AUU).

Is the function OK?

Yes - FAULT FOUND

No - Information

-------------------------------------------------

Information

Remedy in the following order.
- Check the connectors and cables. Check especially the USB-connection for loose connection.

Other information:
- Signal specification Signal Specification, Accessory USB Unit (AUU)
- Location of components Locations
- Universal Serial Bus (USB) Module Universal Serial Bus (USB) Module

Continue - Verification

-------------------------------------------------

Verification

Corrective actions
- Ignition switch position II.
- Check that the external sound source is connected correctly to the control module.
- Check function of the Accessory USB Unit (AUU).

Is the function OK?

Yes - FAULT FOUND

No - Information

-------------------------------------------------

Information
Replace Accessory USB Unit (AUU).

Other information:
- Signal specification Signal Specification, Accessory USB Unit (AUU)
- Location of components Locations
- Universal Serial Bus (USB) Module Universal Serial Bus (USB) Module

Continue - Verification

-------------------------------------------------

Verification

Corrective actions
- Ignition switch position II.
- Check that the external sound source is connected correctly to the control module.
- Check function of the Accessory USB Unit (AUU).

Is the function OK?

Yes - FAULT FOUND

No - Information

-------------------------------------------------

Information

Attempt New Test - Information

-------------------------------------------------