Fault-Tracing Information

Fault-tracing

Information
The diagnostic trouble code indicates that CAN-communication between engine control module (ECM) and central electronic module (CEM) is missing.
Among others, the code may be caused by:
- Engine control module (ECM) or central electronic module (CEM) contains no software for this vehicle.
- Open circuit in CAN-communication between central electronic module (CEM) and engine control module (ECM)
- Programmed engine control module (ECM) or central electronic module (CEM) has been moved from one vehicle to another.

Hint: Read off diagnostic trouble codes in central electronic module (CEM).

Continue - Verification

-------------------------------------------------

Troubleshooting information

Attempt New Test - Information

-------------------------------------------------

Verification

Hint: After repairing, it is necessary to check that the malfunction has been fixed.




- Ignition off
- Reinstall connector, components, etc.
- Start the engine.

Did engine start?

Yes - FAULT FOUND

No - Troubleshooting information

-------------------------------------------------