Fault-Tracing Information

Fault-tracing

Checking the connectors and wiring




- Ignition off.
Check connector and pins on pressure reducing valve for damage, short-circuiting to voltage feed, or oxidation. In case of damage, change pressure reducing valve and Differential electronic module (DEM) as a unit.
Remedy as necessary.

Other information
- Checking wiring and terminals Checking Wiring And Terminals
- Active On-Demand Coupling Module, B6304T4, TF-80SC AWD, B6324S5, TF-80SC AWD, B6324S4, TF-80SC AWD Service and Repair





Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information

FAULT-TRACING FAILED - No Fault Found

Attempt New Test - Checking the connectors and wiring

-------------------------------------------------