Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information HCM-B1D6501

Condition
The Headlamp Control Module (HCM) communicates with the Right headlamp control unit (RHCU).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The Right headlamp control unit (RHCU) registers an internal fault or too high temperature in the horizontal motor circuit.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Damaged Right headlamp control unit (RHCU).
- Temperature too high.
- Short-circuit to supply voltage in the signal cable.
- The signal cable is short-circuited to ground.
- Open circuit on signal cable.

Fault symptom[s]
- Active Bi-Xenon light; No Functionality
- Text window and warning symbol/Text message