Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-B11FC11

Condition
Central electronic module (CEM) powers sensors for parking assistance function.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The power supply is too low.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None

Possible source
- The power supply cable is short-circuited to ground.

Fault symptom[s]
- Front/rear park assist/Does not work