Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition




Power Operated Tailgate Module (POT) checks the voltage over the left anti-trap sensor.
The diagnostic trouble code is stored if the control module detects:
- Voltage too high.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activated hydraulic closing.

Substitute value
- No substitute value.

Possible source
- The cable for the anti-trap sensor has a short-circuit to supply voltage.

Fault symptom[s]
- Tailgate/trunk lid/Hard to close
- Tailgate/trunk lid/Electrical opening/closing does not work