Fault-Tracing Information

Fault-tracing

Checking the ignition switch
- Change to another key belonging to the vehicle. Try to start the engine.
- If it works with another key new software must be ordered for the key that does not work.
- If it does not work with another key, the Start Control Unit (SCU) is defective and must be replaced.
- Remedy as necessary.

Other information:
- Ignition lock Service and Repair





Continue - Verification

-------------------------------------------------






Verification

Note! After carrying out the repair check that the fault has been remedied.








- Ignition off.
- Reinstall the connectors, components etc.
- Check that the vehicle can be started.

Can the vehicle be started?

Yes - FAULT FOUND

No - No Fault Found

------------------------

No Fault Found - Attempt New Test

-------------------------------------------------

Attempt New Test - Checking the ignition switch

-------------------------------------------------