Mirrors, Autodim

Mirrors, autodim























INTRODUCTION
- NOTE! Read through the whole installation instruction before starting the work.
- The illustrations display the procedure in order of operation. The order of operation is repeated in the text






Mirrors, autodim






Note! Wait at least three minutes before unplugging the connectors or removing other electrical equipment.














Applies to mirrors with autodim





Applies to all models
- Turn the mirror base 45 degrees clockwise.





Applies to mirrors without autodim
- Carry out on both sides.





Applies to mirrors without autodim
- Carry out on both sides.





Applies to mirrors without autodim





Applies to mirrors without autodim





Applies to mirrors without autodim





Applies to mirrors without autodim
- Locate and take the routed green 3-pin connector.





Applies to all models





- Reinstall the removed components in reverse order.





- Download the software for the accessory's function. Programming and Relearning
- Calibrate the compass.