Fault-Tracing Information

Fault-tracing

Information
The Steering Angle Sensor (SAS) has registered that information from the Central Electronic Module (CEM) about the ignition position is missing or is faulty.
Use the diagnostic trouble code's frozen values to get information about current conditions when the diagnostic trouble code was generated.





Was the key removed when the diagnostic trouble code was set?

Yes - Fault-tracing 1

No - Fault-tracing 2

-------------------------------------------------

Fault-tracing 2

Finish the fault tracing and proceed with fault tracing on the Central Electronic Module (CEM).

DONE

-------------------------------------------------

Fault-tracing 1

If the diagnostic trouble code was set when the key is removed it should be ignored.





DONE

-------------------------------------------------