Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CVM-U042368

Condition

Note! This diagnostic trouble code (DTC) status is an event controlled diagnostic trouble code (DTC). An event controlled diagnostic trouble code (DTC) does not mean that there is a fault in the control module when it is active, but is designed as information.

The control module is continuously supplied with information from Driver information module (DIM) via CAN communication. The control module checks the quality of the information coming from the Driver information module (DIM).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The transmitting control module indicates a lower quality level of information than the closing velocity module (CVM) accepts.
The control module's test for the diagnostic trouble code (DTC) starts when:
- The vehicle is in normal mode.
- Engine running.
- The voltage supply to the control module is 9-16 V.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Substitute value
- None.

Possible source
- Fault-trace in transmitting control module.

Fault symptom[s]
- Gauges/Other gauge problems
- Trip computer/Does not work