Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ICM-B10E012

Condition
The Infotainment Control Module (ICM) checks the voltage supply to the infrared sensor, which is located in the infotainment keypad.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The power supply is higher than 4.85 V.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activated control module.

Substitute value
- None.

Possible source
- Short-circuit to supply voltage.
- Open circuit.

Fault symptom[s]
- Audio other/Keypad on center console does not work
- Remote control/Does not work