Checking Window In The Rear Door

Checking the window in the rear door

Checking the window in the rear door




- Ignition on.
If a window in the rear doors cannot be operated at all. Follow this routine:
- Uninitialize the relevant window in the rear doors.

Alternatives
1. Uninitializing the window in the rear door on the driver's side
2. Uninitializing the window in the rear door on the passenger side.
Verify the deinitialization by raising and lowering the window a few times.





Is it possible to operate the window?

Yes - Initializing the window in the rear door

No - Replacing the control module

-------------------------------------------------

Initializing the window in the rear door




- Ignition on.
Move the window to its upper limit position using manual control.
Initialize the window.

Alternatives
1. Initializing the window in the rear door on the driver's side
2. Initializing the window in the rear door on the passenger side.
Verify initialization by raising and lowering the window a few times.





Continue - Verifying power window mechanism

-------------------------------------------------

Replacing the control module
Replace the control module in the rear doors.

Other information

Continue - Verifying power window mechanism

-------------------------------------------------

Verifying power window mechanism

Hint: After carrying out the repair, check that the fault has been remedied.

- Ignition off.
- Reinstall the connectors, components etc.
- Ignition on.
Check the function of the window mechanism in the relevant rear door.

Is the power window control operating correctly?

Yes - FAULT FOUND

No - Information

-------------------------------------------------

Information

FAULT-TRACING FAILED - FAULT-TRACING FAILED

Attempt New Test - Checking the window in the rear door

-------------------------------------------------