Front Door Window Motor: Service and Repair

Electric motor, lift mechanism, front door

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing the electric motor for the power window mechanism

Caution! The control module and the electric motor may not be parted.





Remove:
- the door panel as described in Panel front door Panel, Front Side Door, Replacing
- the 3 connectors
- the 3 screws
- the lift mechanism motor.

Installation

Note! For tightening torques, see

Installing the electric motor for the power window

Install:
- the lift mechanism motor
- the 3 M6 screws. Tighten
- the 3 connectors
- the door panel as described in Panel front door Panel, Front Side Door, Replacing

Ordering software

Note! The control modules must be programmed after changing lift mechanism motor.

Order software for the control modules










Initialize the window lift mechanism. See VIDA vehicle communication.