Transfer Case Rear Seal

Transfer Case Rear Seal











Removal

Note! Removal steps in this procedure may contain installation details.

Loosen front propeller shaft joint Refer to: Propeller shaft Propeller Shaft





Note! Note the position of the component before removal.




999 5743 Counterhold 999 5743 Counterhold
1. 999 5743 Counterhold 999 5743 Counterhold
2. Torque: M10, 50 Nm




999 7403 Adapter 999 7403 Adapter




999 5893 Puller 999 5893 Puller




999 7023 Extractor pinion seal Haldex coupling 999 7023 Extractor Pinion Seal Haldex Coupling





Installation





Use: Wheel bearing grease, 1161689








999 7167 Drift 999 7167 Drift





Note! This step is only necessary when installing a new component.

To install, reverse the removal procedure.

Fill with oil Refer to: Oil level bevel gear, checking Procedures