Mud Flaps, Rear

Mud Flaps, rear































INTRODUCTION
- NOTE! Read through the whole installation instruction before starting the work.
- The illustrations display the procedure in order of operation. The order of operation is repeated in the text






Mud Flaps, rear

Note! Points 1-6 are carried out on both sides.





- Remove the rear wheel.





- Remove the four screws.






Install:
- the mud flap
- the four new screws from the kit, and tighten.





- Drill a -5 mm (3/16") hole for the pop rivet.





- Install the pop rivet.





- Reinstall the rear wheel, tightening torque 90 Nm (66 lbf.ft).