A/T - TF80 Fluid Changing Procedure

Retailer Technical Journal 20145
TF80 transmission fluid, changing

Date 12-05-08

Reference: VIDA

Note! If using a printed copy of this Retailer Technical Journal, first check for the latest online version.





AFFECTED VEHICLES:

DESCRIPTION:

The service procedure in VIDA regarding changing transmission fluid for the TF-80SC, TF80SC AWD 6-speed automatic transmissions has been updated. The updated service procedure will be included in the VIDA 2009A release. Note: The transmission fluid does not normally need changing! ALWAYS refer to VIDA for Service Programs!





MATERIAL:





TOOLS:

SERVICE:


1. Note! Some variation in the illustrations may occur, but the essential information is correct.


2. Follow the method in VIDA for changing transmission fluid except the step for connecting the hose, according to: Removal, replacement and installation Power transmission Transmission Automatic, transmission (hydro-mechanical)

Connect the hose according to steps 3-6.





Use: Hose 9997363

Removal





3. Remove the oil cooler's return line from the transmission.





4. Remove the oil cooler's return line from the oil cooler.

Installation





5. Install the return line on the oil cooler as illustrated.

6. Install the hose on the return line with a hose clamp.





Use: Hose 9997363

Important! The plastic hose is quite hard. Tighten the hose clamp hard to prevent leakage in the connection.

Warning! Be prepared to collect escaping fluids.





WARRANTY CLAIM INFORMATION