Valve Housing, TF-80SC

Valve housing

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Removal

Removing the cable harness
Remove the wiring harness from the control system. Refer to: Transmission Control Unit Wiring Harness, TF-80SC AWD Transmission Control Unit Wiring Harness.





Note! Protect the cable harness by taping it to the outside of the transmission.

















Installation





Caution! Ensure that the cable harness is not trapped when the control system is positioned.




Lightly tighten.




Use new screws and a new gasket.
Lightly tighten.




Tighten alternately, M6.

Installing the cable harness
Install the wiring harness to the control system. Refer to: Transmission Control Unit Wiring Harness, TF-80SC AWD Transmission Control Unit Wiring Harness.