Resetting the Service Reminder Indicator (SRI)

Resetting the service reminder indicator (SRI)

Note: All doors, hood and trunk are required to be closed in order to perform this procedure successfully.

Note: Please refer to Description of the Ignition Modes (Ignition Switch Positions) for additional information on Ignition Modes (Ignition Switch Positions) Description of the Ignition Modes (Ignition Switch Positions)

Hint: It is also possible to reset the service reminder indicator via VIDA vehicle communication.

Carry out the following procedure to reset the service reminder indicator:
- Ignition switch position I.
- Press and hold the trip odometer reset button.
- Ignition switch position II.
- Wait for 10 seconds.
- Release the reset button when the information lamp starts to flash.

The instrument beeps when resetting has been successful.