Combined Instrument Panel, R-Design

Combined instrument panel, R-design


















INTRODUCTION
- NOTE! Read through the whole installation instruction before starting the work.
- The illustrations display the procedure in order of operation. The order of operation is repeated in the text section.






Combined instrument panel, R-design




- Before replacing the Driver information module, programmed data must be read out from the Driver information module. This is done in VIDA vehicle communication. After replacement, the data in question must be programmed in the new Driver information module.





Note! Wait at least three minutes before unplugging the connectors or removing other electrical equipment.









































- Download new software for the Driver information module. After downloading, data read-out must be programmed. The clock must also be set. Programming and Relearning