Drive Belt Tensioner: Service and Repair

Tensioner accessory drive belt

Operation number: 21582-3

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Removal

Note! Removal steps in this procedure may contain installation details.

Remove the battery. Removal and Replacement




















Torque: M6, 10 Nm




Torque: M6, 10 Nm

Torque: M8, 24 Nm




Slacken the tensioner using a 19 mm fixed wrench.
Lock the tensioner in the slackened position using a 3 mm pin.




Torque: M8, 24 Nm

Torque: M10, 50 Nm




Torque: M8, 24 Nm




Torque: M8, 24 Nm

Installation

To install, reverse the removal procedure