Braking Sensor/Switch: Service and Repair

Position sensor, brake pedal

Operation number: 38611-2

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Removal

Note! Removal steps in this procedure may contain installation details.

Remove the following items:
- the battery. Refer to: Battery Removal and Replacement
- the plenum chamber. Refer to: Plenum chamber Service and Repair.




Torque: M6, 10 Nm





Note! Depress the brake pedal several times to release the vacuum in the brake servo.





Installation

To install, reverse the removal procedure