Description of Frozen Values, POT

Description of frozen values

Explanation

Frozen values are parameter values that are stored when a diagnostic trouble code (DTC) is stored.
Not all parameters can be read out for all diagnostic trouble codes. The parameter values can only be read if they can provide additional information on the prevailing conditions when the code was generated.

Parameters, value

Total mileage
Measurement range: 0 - 1,000,000 km.
The value indicates the vehicle's total mileage when the Diagnostic Trouble Code (DTC) was generated.

MECU power supply
Measurement range: 0 - 63 V.
Normal range: 12.0 - 14.5 V.
The value indicates the power supply to the central electronic module (CEM) when the diagnostic trouble code was generated.

Vehicle speed
The value indicates the speed of the vehicle when the diagnostic trouble code was stored.

Outside temperature
Measurement range: -40 to +215 °C.
The value indicates the outside temperature when the diagnostic trouble code was generated.

Power supply mode
The value indicates the status of the power supply mode when the diagnostic trouble code was generated.
Key removed
Key recently removed
Key approved
Ignition off after Accessory position
Accessory position
Accessory position after Ignition on
Ignition on
Running
Start attempt

Anti-clamp sensor
Indicates if the anti-clamp sensor was pressed in or not when the trouble code was set.
Pressed in: Anti-clamp sensor has registered that something is clamped.
Not pressed in: Anti-clamp sensor has not registered that something is clamped.

Opening motor, status
Indicates if the tailgate's opening motor was in the opening phase, reverse, or inactive when the diagnostic trouble code was generated.

Closing motor, status
Indicates if the tailgate's closing motor was in the closing phase, reverse, or inactive when the diagnostic trouble code was generated.

External handle
The value indicates if the opening handle on the tailgate was pressed in or released when the diagnostic trouble code was generated.

Close button, tailgate
The value indicates if the closing button on the tailgate was pressed in or released when the diagnostic trouble code was generated.