Checking the Infotainment Control Module (ICM)

Checking the infotainment control module (ICM)

Fault-tracing information

Checking the infotainment control module (ICM)
There are reported problems with the Infotainment control module (ICM)turning itself off at start. This is due to a malfunction in the software and is solved by downloading an updated software.

Hint: A temporary solution is to turn off the ignition for approx. 5 seconds and then turn on the ignition again.


Action
- Go to the tab software and program the control module with the latest software.

Fault symptom
- Audio other/Audio unit (complete) does not work
- Audio other/Other audio problems
- Radio/Does not work





Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

-------------------------------------------------