Collision Avoidance Module: Service and Repair

Collision warning control module

Removal

Note! Removal steps in this procedure may contain installation details.





Vehicles manufactured before chassis number: 22094

Remove glove compartment Refer to: Glove compartment Glove Compartment





Note! Make sure that the component terminals are not bent or damaged.

Torque: M6, 10 Nm

Vehicles manufactured from chassis number 22094

Remove the following items:
- Pedal box, brake Refer to: Pedal box, brake Pedal Box, Brake
- Combined instrument panel Refer to: Combined instrument panel Combined Instrument Panel








Torque: M6, 10 Nm





Note! Make sure that the component terminals are not bent or damaged.

Torque: M6, 10 Nm

All vehicles

Installation

To install, reverse the removal procedure.

Vehicles manufactured before chassis number: 22094

Order and download appropriate software. Programming and Relearning