Fault-Tracing

Fault-tracing

Replacing the control module
The control module has registered an internal fault. Replace the control module.
Remedy as necessary.

Other information
- Control module front seat Service and Repair

Continue - Verifying seat operation

-------------------------------------------------

Verifying seat operation




Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off.
- Reinstall the connectors, components etc.
- Ignition on.
Check that seat operation functions. Move the seat manually in all directions. Also check that the seat is moved to a programmed position by pressing one of the memory buttons.

Is the seat working properly?

Yes - Troubleshooting complete for this DTC

No - Information

-------------------------------------------------

Information




Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

-------------------------------------------------