Fault-Tracing

Fault-tracing

Replacing the control module
The control module has registered an internal fault.
Replace the control module.

Other information
- Combined instrument panel Combined Instrument Panel

Continue - Verification

-------------------------------------------------

Information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Replacing the control module

-------------------------------------------------

Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off.
- Reinstall the connectors, components etc.
- Ignition on.
Check:
- Does the combined instrument panel work as it should?

Was a fault detected?

Yes - Troubleshooting procedure complete

No - Information

-------------------------------------------------