Fault-Tracing

Fault-tracing

Checking the diagnostic trouble codes (DTCs)




Invalid or incorrect data has been received from another control module via the CAN-net. Check the transmitting control module for diagnostic trouble codes and any errors.

The diagnostic trouble code may also be generated in case of error in CAN-communication. In the event of a diagnostic trouble code (DTC) for a communication fault in the relevant control module, any diagnostic trouble codes (DTCs) in the central electronic module (CEM) must also be checked.
Troubleshoot the CAN-net.
Remedy as necessary.

Other information





Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information





In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - Exit Fault-Tracing

-------------------------------------------------