Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information TCM-P273300

Condition
The driving part of the transmission (clutch C1) is disengaged when the following conditions are fulfilled:
- The vehicle is stationary.
- The engine is idling.
- The brake pedal depressed.
- Gear selector is in position D.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Transmission does not have drive in gear 1, 2, 3, or 4.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Normal driving.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Solenoid SLC1 has jammed.
- Mechanical fault in the transmission.

Fault symptom[s]
- General warning lamp lit
- Malfunction indicator light (MIL), on
- No lock-up