Fault-Tracing

Fault-tracing

Checking components and wiring

Note! If diagnostic trouble code for alternator is stored, then troubleshoot that diagnostic trouble code first.

Check the charging system's function for high voltage.

Hint: Read off the battery voltage by clicking on the symbol for VCT2000.









Continue - Verification

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Checking components and wiring

-------------------------------------------------

Verification




Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off
- Reinstall the connectors, components etc.
- Start the engine.
Read off the battery voltage.
Check the battery voltage, battery voltage shall be 13.5 V-14 V.





Is the function OK?

Yes - Troubleshooting procedure complete

No - Fault-tracing information

-------------------------------------------------