Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PHM-B1D5513

Condition




The Phone module (PHM) registers an open-circuit on the cable for the telephone antenna signal.
The diagnostic trouble code is stored if the control module detects:
- Open-circuit in the signal to the internal reserve antenna.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position I and II.
- Battery voltage between 9 - 16 V.

Substitute value
- None.

Possible source
- Open-circuit in the signal to the internal reserve antenna.
- Contact resistance or oxidation.

Fault symptom[s]
- No or bad receiving in the telephone