Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CPM-B1D2692

Condition
The combustion preheater module (CPM) checks the blower fan motor of the heater for combustion air.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The blower fan motor does not function as it should.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Heater started.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- Heater's function blocked.

Possible source
- Damaged blower fan motor.

Fault symptom[s]
- Poor heating in compartment
- Activation parking-/auxiliary heater; no function