Upper Shock Absorber Bearing

Upper bearing shock absorber

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Preparatory work

Remove the spring front. Front Suspension

Removal

Removing the shock absorber bearing





Remove:
- the 3 x screws
- the spacer washer
- the shock absorber bearing.

Installation

Note! For tightening torques, see Specifications. [1][2]Specifications

Installing the shock absorber bearing

Install:
- the new shock absorber bearing
- the spacer washer
- the 3 x M8 screws.

Finishing

Install the spring front. Front Suspension