Mirrors: Description and Operation

Mirrors, Auto Dimming With Compass














INTRODUCTION
- NOTE: Read through the whole installation instruction before starting the work.
- The illustrations display the procedure in order of operation. The order of operation is repeated in the text section

Mirrors, auto dimming with compass

NOTE: Some steps in these installation instructions are presented with illustration only.

- Turn the ignition key to position 0.





NOTE: Wait at least three minutes before unplugging the connectors or removing other electrical equipment.





- Press the front edge and the underside of the cover, then carefully pull both sides loose from each other.





- Remove the rearview mirror from the windscreen by turning it anticlockwise until it releases from the

NOTE: Grip the mounting (not the mirror), and turn.

Place the mirror to one side, there is a new one in the kit.














- Download the software for the accessory's function following the service information in VIDA.
- Calibrate the compass according to the car's instruction book.