Fault-Tracing

Fault-tracing

Checking the wiring
Check the cables between control module and forward-sensing radar for an open-circuit, loose connections, contact resistance, and oxidation.
Remedy as necessary.

Other information
- Signal description Signal Specification, Forward Sensing Module (FSM)
- Breakout box, connecting Connecting The Breakout Box, Forward Sensing Module (FSM)
- Location of components Location Of Components, Forward Sensing Module (FSM)
- Checking the supply voltage/ground terminal Checking The Voltage/Ground Terminal, Forward Sensing Module (FSM)

Was a fault detected?

Yes - Troubleshoot complete for this DTC

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit Fault-Tracing

No - Attempt New Test

------------------------

Attempt New Test - Checking the wiring

-------------------------------------------------