Fault-Tracing

Fault-tracing

Calibration of position sensor
When replacing the Headlamp Control Module (HCM) or any of the position sensors, these must be calibrated
Calibrate the position sensors according to VIDA/DIAGNOSTICS/CARCOMMUNICATION/HCM/ADVANCED.

Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
In case of this defect, troubleshooting is not followed by verification.
The information can be displayed again or the fault-tracing for this fault can be interrupted.

Do you want to view the information again?

Yes - Attempt New Test

No - Exit Fault-Tracing

------------------------

FAULT FOUND - DONE

Attempt New Test - Calibration of position sensor

-------------------------------------------------