Drive Belt Tensioner: Service and Repair

Tensioner accessory drive belt

Operation number: 21582-3

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Removal

Note! Removal steps in this procedure may contain installation details.

Remove the battery. Refer to: Battery Removal and Replacement




















Torque: M6, 10 Nm




Torque: M6, 10 Nm

Torque: M8, 24 Nm




Slacken the tensioner using a 19 mm fixed wrench.
Lock the tensioner in the slackened position using a 3 mm pin.




Torque: M8, 24 Nm

Torque: M10, 50 Nm




Torque: M8, 24 Nm




Torque: M8, 24 Nm

Installation

To install, reverse the removal procedure