Fault-Tracing

Fault-tracing

Replacing the control module
Phone module (PHM) has detected an internal memory fault.
Replace the control module.

Other information
- Phone Module (PHM) Phone Module (PHM) Phone Module (PHM) Phone Module (PHM)
- Location of components Location Of Components, Phone Module (PHM)





Continue - Verification

-------------------------------------------------

Information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit Fault-Tracing

No - Attempt New Test

------------------------

Attempt New Test - Replacing the control module

-------------------------------------------------

Verification




Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off.
- Reinstall the connectors, components etc.
- Ignition on.
Check the carphone by making a call.
Read diagnostic trouble codes by clicking the VCT2000 symbol.





Is the carphone working?

Yes - Troubleshooting complete for this DTC.

No - No Fault Found

------------------------

No Fault Found - Information

-------------------------------------------------