Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information DEM-P093215

Condition
The differential electronic module (DEM) checks that the signal from the oil temperature sensor is within the permitted range. If the signal from the sensor is higher than the predefined upper parameter, the control module interprets this as a fault and the diagnostic trouble code (DTC) is stored.
The diagnostic trouble code (DTC) can be diagnosed at ignition on and with the engine running.





Substitute value

- Four wheel drive is disengaged.

Possible source

- Connector resistance and oxidation in the connectors.
- Damaged oil pressure and oil temperature sensor.
- Damaged control module.

Fault symptom[s]
- Unsatisfactory all-wheel drive