Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-B102692

Condition
The steering column lock is checked by the steering column lock module (SCL). The lock plunger's position is indicated for Steering column lock module (SCL) using a switch and the information is sent to Central electronic module (CEM).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The lock plunger's position cannot be determined.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- All ignition positions.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Internal fault in the steering column lock module (SCL).

Fault symptom[s]
- Starter motor does not operate
- Message in information display