Oil Pressure Sensor: Service and Repair

Pressure sensor, engine oil

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Raising the vehicle




Raise the vehicle. See: Jacking points body Locations.
Remove the engine splash guard.

Removing oil pressure switch





Hint: Collect any oil spillage using paper or similar.

Disconnect the connector for the oil pressure sensor.
Remove the oil pressure sensor.

Installation

Note! For tightening torques, see Specifications. Tightening Torque

Installing the oil pressure sensor
Install the oil pressure sensor. Tighten. See Specifications. Tightening Torque.
Connect the connector for the oil pressure sensor.
Install the lower engine splash guard. Lower the vehicle.