Configuration Fault

Configuration fault
The vehicle's configuration file, which is stored in the central electronic module (CEM), does not indicate that the vehicle is equipped with a digital radio receiver.
- Remedy the fault by loading new software into the Central Electronic Module (CEM).


Continue - Verification

-------------------------------------------------

Verification




Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off
- Reinstall the connectors, components etc.
- Ignition on.
Check that the radio is working and that the reception is acceptable.

Is the radio playing through the loudspeakers?

Yes - Troubleshooting complete for this DTC.

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

-------------------------------------------------